PI Matériaux plastiques

PI Plastic Sheet, Rod, Tube & Custom CNC Parts

High-performance polyimide materials and precision-machined components for high-temperature, wear-resistant, electrical insulation, vacuum, and precision applications.

PI (polyimide) is a high-performance engineering plastic. Great Plastics supplies polyimide stock shapes, including sheets, rods, and tubes, as well as custom CNC-machined PI components.

±0,01 mm

tolérance d'usinage

24 h

Réponse rapide

5 à 7 jours

Livraison rapide

1 pièce

Quantité minimale de commande

Présentation générale

Why Engineers Specify PI Plastic Materials

PI is generally considered when a component must operate under a combination of high temperature, low friction, wear conditions, vacuum environments, electrical requirements, and tight dimensional control.

Continuous High-Temperature Applications

These applications may include thermal processing equipment, semiconductor components, and precision machinery.

Wear and Friction-Controlled Components

PI is considered for sliding components where lubrication is limited, friction control is important, or dimensional stability must be maintained.

Precision Components in Demanding Environments

PI can support precision components where thermal expansion, moisture response, and geometry retention influence long-term performance.

Formulaires disponibles

PI Plastic Forms & Custom Parts

Great Plastics supplies polyimide in standard stock shapes and custom-machined forms. Available material options include unfilled and filled PI grades selected according to temperature, wear, friction, electrical, and mechanical requirements.

PI-plastic sheet for precision machining and insulation components

PI Sheet

PI sheet and plate stock for insulation components, spacers, covers, wear parts, and precision-machined components.

PI Rod

Round PI stock for CNC-machined bushings, bearings, seals, rollers, and other cylindrical components.

PI plastic tube stock for chemical resistant and insulating applications

PI Tube

PI tube stock for sleeves, insulation components, bushing bodies, and other parts requiring accurate internal dimensions.

custom CNC machined PI plastic parts manufactured for OEM applications

Pièces usinées

Custom CNC-machined PI parts per customer drawings, specifications and tolerances. OEM available, from prototype to production.

Choix des matériaux

PI Material Grades & Filler Selection

PI grades can be formulated with different fillers to modify friction, wear resistance, stiffness, and load capacity. Grade selection depends on the primary operating requirements.

GRADE / FILLER BEST FOR AVOID WHEN RFQ INPUTS
Virgin (unfilled) PI Maximum temperature, best electrical insulation and dimensional stability Lowest cost or impact toughness is the priority Service temperature, electrical & vacuum requirements
Graphite-filled PI Dry-running wear: bearings, bushings, seal rings Lowest friction coefficient matters more than wear life Sliding speed, PV factor, counterface material
PTFE-filled PI Lowest-friction sliding and sealing: wear rings, seals High-load structural duty Friction requirement, media, temperature
Carbon fiber reinforced PI High-load, high-stiffness aerospace and mechanical parts Where electrical insulation is required (carbon fiber conducts) Load, stiffness, environment
Glass-filled / MoS2-filled PI Tailored stiffness or friction (available on request) — Application detail for compound selection

Données de performance

PI Plastic Material Properties

Typical properties for an unfilled (virgin) polyimide grade. Actual values depend on the specific material grade, test method, and processing conditions.

PROPERTY TEST METHOD TYPICAL VALUE UNIT
Physical Properties
Densité ISO 1183 / D-792 ~1.43 g/cm³
Water absorption (24 h) ASTM D570 / D-570 ~0.21–0.24 %
Propriétés mécaniques
Tensile strength (23 °C) ASTM D638 / D-1708 ~87–92 MPa
Tensile modulus ASTM D638 ~2.5 GPa
Flexural strength ASTM D790 / D-790 ~110–112 MPa
Compressive strength ASTM D695 / D-695 ~111–117 MPa
Elongation at break ASTM D638 / D-1708 ~7.5–12.5 %
Hardness Shore D ~85–92 Shore D
Propriétés thermiques
Glass transition temperature DSC / DMA ~330–360 °C
Continuous service temperature — ~260 °C
Short-term peak temperature — ~400 °C
Coefficient of thermal expansion ASTM E831 / D-696 ~52–54 ppm/K
Propriétés électriques
Dielectric strength ASTM D149 / GB 1408 ~22 kV/mm
Volume resistivity ASTM D257 / D-257 >10¹² to ≥10¹⁵ Ω·m

Remarque: Actual values depend on the specific PI grade, formulation, processing method, test standard, and application conditions.

Capacités de production

PI Machining and Custom PI Parts

Precision PI components require both suitable material selection and controlled machining. Great Plastics supports PI machining from stock material to finished components.

PI can be machined into complex, close-tolerance components, but its hardness and low thermal conductivity require careful control of cutting conditions. Appropriate tooling, feeds, speeds, workholding, and heat management help maintain dimensional accuracy and surface quality.

Fraisage et tournage CNC
Usinage de précision
Pièces à tolérances serrées
Fabrication de prototypes
Fabrication en série pour les équipementiers (OEM)
Usinage multiaxial

Typical PI components include bushings, bearings, seals, wear rings, insulators, sleeves, and wafer-handling components. Prototype, low-volume, and OEM production quantities are supported.

1–10,000+
Pièces par série
CMM
Inspection
24 h
Délai de réponse au devis

Sélection personnalisée

Custom PI Precision Components

Successful custom PI component production depends on clear drawing definition, including critical surfaces, datum structures, tolerance requirements, and functional areas.PI components should be evaluated according to load, speed, mating materials, temperature exposure, vacuum or dry gas environments, and whether the component functions primarily as a wear part or electrical insulator.

Bearings and Bushings

Filled PI suits bearings and bushings for demanding load, speed and wear conditions.

Seal Rings and Wear Rings

PI seal & wear rings deliver superior heat resistance, friction control and dimensional stability beyond ordinary plastics.

Insulation Components

Unfilled PI provides reliable electrical insulation for defined voltage, thickness and temperature requirements.

Precision Fixtures

PI precision fixtures maintain geometry and thermal stability for semiconductor, aerospace and high-temperature use.

Cas d'utilisation dans le secteur

Applications of PI Plastic Materials

PI is used in applications requiring high-temperature stability, wear resistance, electrical insulation, low outgassing, and dimensional stability. Typical applications include semiconductor equipment, aerospace, electrical and electronics, and industrial machinery.

Pièces pour la manipulation des plaquettes, supports et composants pour le vide, présentant une stabilité dimensionnelle, une résistance aux produits chimiques et un faible niveau de contamination.

Équipements pour semi-conducteurs

PI for wafer handling, high-temp fixtures and vacuum parts. Low outgassing, chemical resistance & stable dimensions. RFQ: cleanliness, media, thermal cycling, tolerances.

Pièces structurelles légères se caractérisant par un rapport résistance/poids élevé, une bonne résistance thermique et une grande stabilité dimensionnelle.

Composants aérospatiaux

PI bearings, seals, structural & insulating parts. Lightweight, heat-resistant and radiation tolerant. RFQ: temp, load, environment, certifications.

Connecteurs et isolateurs haute température pour une isolation stable et des performances électriques précises.

Électricité et électronique

PI insulation parts, high-temp connectors and sleeves. Stable insulation, high dielectric strength and low creep. RFQ: voltage, temp class, insulation, environment.

Pièces en plastique issues de l'ingénierie mécanique de précision

Machines industrielles

PI bearings, bushings, wear rings and sliding components. Great wear & high-temp resistance. RFQ: speed, load, lubrication, mating surface, temp.

Comparaison des matériaux

PI vs. Other Engineering Plastics

The table below compares PI with commonly selected high-performance engineering plastics. Material selection depends on temperature, mechanical load, chemical exposure, wear, machinability, and cost.

GRADE / FILLER BEST FOR AVOID WHEN RFQ INPUTS
Virgin (unfilled) PI Maximum temperature, best electrical insulation and dimensional stability Lowest cost or impact toughness is the priority Service temperature, electrical & vacuum requirements
Graphite-filled PI Dry-running wear: bearings, bushings, seal rings Lowest friction coefficient matters more than wear life Sliding speed, PV factor, counterface material
PTFE-filled PI Lowest-friction sliding and sealing: wear rings, seals High-load structural duty Friction requirement, media, temperature
Carbon fiber reinforced PI High-load, high-stiffness aerospace and mechanical parts Where electrical insulation is required (carbon fiber conducts) Load, stiffness, environment
Glass-filled / MoS2-filled PI Tailored stiffness or friction (available on request) — Application detail for compound selection

PI is chosen for high temperature, wear resistance, electrical insulation and dimensional stability. PEEK machines easily with balanced mechanical and chemical properties. PPS delivers great chemical resistance and dimensional stability. PTFE is selected primarily for low friction. PAI serves high-strength, high-temperature demanding applications. Final material selection shall be verified against grade datasheets and operating conditions.

Votre partenaire

Pourquoi choisir Great Plastics ?

From material selection to volume production, we support industrial OEMs with engineering expertise, precision machining, and reliable supply.

01

Engineering Support

Select proper PI grades based on temperature, chemical, electrical, load, wear and machining needs.

02

Choix des matériaux

Recommend unfilled, glass/carbon-filled, wear-modified and specialty PI per your application.

03

Custom Manufacturing

Supply PI stock and custom machined parts for prototype, low-volume and mass production.

04

Quality Control

Verify quality against drawings, specs, tolerances, inspection standards and application demands.

Request a Quote for Custom PI Plastic Components

Envoyez vos plans, vos cahiers des charges ou vos échantillons de pièces à notre équipe d'ingénieurs.

Nous vous répondrons dans un délai d'un jour ouvré en vous communiquant nos recommandations concernant les matériaux, les tarifs et les délais de livraison.

Foire aux questions

Foire aux questions

Quick answers to the questions engineers and procurement teams ask most about PI materials.

How high temperature can PI withstand?

Depending on the grade and operating conditions, thermoset polyimide can provide continuous service at approximately 260°C, with selected grades capable of short-term exposure to significantly higher temperatures. Actual temperature capability depends on the grade, filler system, load, and exposure time.

PI and PEEK are suited to different applications. PI generally provides higher temperature capability and good wear and electrical insulation performance, while PEEK is easier to machine and offers a strong balance of mechanical, chemical, and thermal properties. Material selection depends on temperature, load, wear, chemical exposure, and cost.

Yes. PI can be CNC machined into precision components, including bushings, bearings, seals, insulators, sleeves, and wear rings. Because polyimide is hard and has low thermal conductivity, appropriate tooling, cutting conditions, workholding, and heat control are required for close-tolerance machining.

Typical PI applications include semiconductor wafer-handling components, high-temperature fixtures, vacuum components, aerospace bearings and seals, electrical insulation parts, and industrial wear components.

Send your drawing or 3D model, required PI grade, material form, dimensions, quantity, and operating conditions through our quote form. Our engineering team will review the requirements and confirm suitable material and machining options.