Engineering Plastic Datasheets & PDF Downloads

We provide technical datasheets for PEEK, PPS, PEI, PAI and PI to help you compare key properties, evaluate material options and identify suitable candidates for your application.

Find data

PDF herunterladen

Compare

Send RFQ

Materialvergleich

Finden Sie die richtigen Materialdaten

We organize our engineering plastic data by material and application requirements, so you can quickly review the properties most relevant to your part. Use the filters below for initial screening, then send us your drawing and operating conditions so we can confirm the grade and manufacturing requirements during RFQ review.

Material Continuous Service Best For Datasheet Action
PEEK Polyether Ether Ketone 260 °C Continuous service

High heat resistance, chemical resistance, wear performance and strength; self-lubricating options available.

High Temperature Chemical Resistance Wear & Friction Elektrische Isolierung Formstabilität
✓ PDF Available
PDF herunterladen Material Page
PPS Polyphenylene Sulfide 220 °C Continuous service

Chemical stability, very low moisture absorption and strong dimensional stability.

High Temperature Chemical Resistance Formstabilität Low Moisture
✓ PDF Available
PDF herunterladen Material Page
PEI Polyetherimid 170 °C Typical continuous service

Thermal performance, flame resistance, electrical insulation and dimensional stability.

High Temperature Elektrische Isolierung Formstabilität Low Moisture
✓ PDF Available
PDF herunterladen Material Page
PAI Polyamide-Imide 250 °C Continuous service

High load capability, wear resistance, high-temperature dimensional stability and self-lubricating grade options.

High Temperature Wear & Friction Formstabilität
✓ PDF Available
PDF herunterladen Material Page
PI Polyimid — Confirm by grade

Extreme-temperature applications, dry-running wear, vacuum service and specialized electrical insulation.

High Temperature Wear & Friction Elektrische Isolierung Formstabilität
✓ PDF Available
PDF herunterladen Material Page

PDF herunterladen

Finden Sie die richtigen Materialdaten

In jeder PDF-Datei sind die typischen Werte und Prüfverfahren für die jeweilige Güteklasse aufgeführt.

PEEK-Datenblatt

Polyetheretherketon

Noten: PEEK-1000 (rein) · FC1030 (10 % Graphit + PTFE) · G1030 (30 % Glas) · C1030 (30 % Kohlenstoff)

PPS-Datenblatt

Polyphenylensulfid

Noten: PPS-1000 (ungefüllt) · PPS-G1040 (40 % Glasfaser)

PI-Datenblatt

Polyimid

Noten: Spezialqualitäten – numerische Daten werden je nach Anwendung geprüft

PEI-Datenblatt

Polyetherimid

Noten:PEI-1000 (ungefüllt) · PEI-G1030 (30 % glasfaserverstärkt)

PAI-Datenblatt

Polyamid-Imid

Noten: PAI – Typische Eigenschaften

Compare

Materialien vergleichen

Choose the materials you are deciding between. Values are typical for unfilled grades (PEEK-1000, PPS-1000); grade-level ranges and test methods are in the PDF datasheets.

Swipe the table sideways to see all material columns.

    Property explorer

    Pick a property to see how the selected materials compare.

    Send Us Your Application Requirements

    Great Plastics kann die Materialauswahl, die Produktform, das Fertigungsverfahren und die Details Ihrer Anfrage prüfen, bevor wir Ihnen ein Angebot für Ihr nächstes technisches Kunststoffteil unterbreiten.